Products

DHAL DESHUSKER Dhal dehusker is used for removing skin from different kinds of dhal. In some cases pre-processing is required for proper removal of skin. It can be manufactured either in Milld Steel or in Stainless Steel. Varients: 350 kg/h

PULVERIZER – Hammer Type with Cyclone and Airlock Hammer type pulveriser is a heavy duty machine which comes with a blower for sucking the flour and blowing into a pipeline followed by an cyclone and airlock to remove air and separate the flour respectively. Varients: 200 kg/h 300 kg/h 500 kg/h 1000 kg/h

GRONDNUT DESKINNER (Split) Deskinner is a machine used for removing the red skin of a groundnut after roasting. In this machine the nut will be splitted into two halves which will be used in the Chikki manufacturing industry. Varients: 200 kg/h 750 kg/h

GRAIN POLISHER This machine is suitable for softening the skin of proso, kodo, barnyard and browntop millet. Once the skins are soft a proper dehulling is obtained in the Millet Dehuller. It is also suitable for other crops including but not limited to Finger millet, Pearl millet, Sorghum, etc. This Machine has a processing capacity of 350kg/h. It conveniently operates on a 15HP three phase electric motor. Varients: 40 kg/h 350 kg/h

GRAIN ROASTER When the agitator rotates, the Material is carried radically around the inside of blender. Outer & inner ribbons move the material in opposite direction. Thus the triple mixing action takes place. The Roaster is provided with M.S. Jacket, which is filled with special purpose heating Oil. The Heating oil in the jacket is heated by Electrical operated Oil immersion Heaters, inserted from the pocket at the corner Mixer. Once the oil in the jacket’ is heated, the material in the container is uniformly mixed as well as roasted. Electronic Digital temp controller controls the required Temperature of heating. It is ideal to set the Themerature at 1800 to 1900 C. while roasting. The oil heating can be carried out with Gas instead of Electrical heaters as per the Customer requirement. Approx. Rs 40,000 / Piece

MILLET DEHULLER – MILLET MILL This machine is most suitable for de-hulling small millets like foxtail, little, kodo, proso and bardyard millets. It has processing capacity of 80 kg/h. It operates with single or three phase one HP electric motor. The husk and rice are separated through a cyclone separator and the blower assembly. It has de-hulling efficiency of more than 95%.

DESTONER CUM GRADER CUM ASPIRATOR FOR RICE Destoner is suitable for removing stones and impurities from grains. A separate grading unit is attached for size wise grading. In addition, an aspirator is used for removing light weight impurities. This machine is made up of Mild Steel. Varients: 500 kg/h 1000 kg/h 2000 kg/h 3000 kg/h

GRADER WITH HOOPER An additional hopper is attached to the grader through which the input raw material is controlled. Grader normally comes with two or single deck sieves. Grains are separated as per the size of the sieve attached to the grader. Varients: 250 kg/h 500 kg/h 1000 kg/h 2000 kg/h

GRADER CUM ASPIRATOR Grader is used to grade grains based on their sizes. It normally comes with two or single deck sieves. An aspirator is attached on top the grader for removing light weight impurities. Varients: 500 kg/h 1000 kg/h 2000 kg/h

COCONUT TREE CLIMBER This equipment is used to climb coconut tree. The Coconut Tree climber consists of two metal loops that are meant for holding the legs. They have a handle at the top for hand grip and a pedal base at the bottom. The loops are put around the tree trunk on the opposite sides. The loop on either side is lifted up by the simultaneous movement of the hand and feet. By such alternate motion, one can easily climb a coconut tree in minutes.

DESTONER WITH HOPPER Destoner is suitable for removing stones and impurities from grains. A hopper is used to control the flow of input raw material. This machine is made up of Mild Steel. Varients: 250 kg/h 500 kg/h 1000 kg/h 2000 kg/h 3000 kg/h

DESTONER CUM GRADER CUM ASPIRATOR FOR DHAL Destoner is suitable for removing stones and impurities from various Dhal like Black Gram, Green Gram, Red Gram, etc… A separate grading unit is attached for size wise grading. In addition, an aspirator is used for removing light weight impurities. This machine is made up of Mild Steel. Varients: 500 kg/h 1000 kg/h 2000 kg/h 3000 kg/h