Products

Destoner Cum Grader Cum Aspirator Post Hulling Machine | Perfura Technologies The output of the millet dehuller will contain a mixture of whole millet rice along with few percentage of broken rice, unhulled grain and husk. This post hulling destoner is used for separating the whole rice from the broken rice. An aspirator is used for removing the husk. Finally in the grader the broken rice and unhulled grain are separated. At the end of this process we can get 98% dehulled unpolished millet rice.

Grader Cum Aspirator For Millets Machine | Perfura Technologies Grader is used to grade grains based on their sizes. An aspirator is attached with the grader so that the light weight impurities like dehusked skins will be separated. 500 kg/h 1000 kg/h 2000 kg/h

Grain Polisher Machine | Perfura technologies This machine is suitable for softening the skin of proso, kodo, barnyard and browntop millet. Once the skins are soft a proper dehulling is obtained in the Millet Dehuller. It is also suitable for other crops including but not limited to Finger millet, Pearl millet, Sorghum, etc. This Machine has a processing capacity of 350kg/h. It conveniently operates on a 15HP three phase electric motor. 40 kg/h 350 kg/h

Destoner Cum Grader Cum Aspirator Pre Cleaning Machine | Perfura Technologies Destoner is suitable for removing stones and impurities from various Millets like Little Millet, Kodo Millet, Barnyard Millet, Proso Millet, Finger Millet, Foxtail Millet, etc… A separate grading unit is attached for size wise grading. In addition, an aspirator is used for removing light weight impurities. This machine is made up of Mild Steel. 500 kg/h 1000 kg/h

Groundnut Deskinner Whole Cum Grader Machine | Perfura Technologies This deskinner works on abrasion principle in which the whole nut will be coming as an output after the peeling process

Groundnut Deskinner Split Cum Grader Machine | Perfura Technologies Deskinner is a machine used for removing the red skin of a groundnut after roasting. In this machine the nut will be splitted into two halves. A grader is attached to separate the split and the whole groundnut if there is any. 200 kg/h 750 kg/h

Groundnut Deskinner Split Machine | Perfura Technologies Deskinner is a machine used for removing the red skin of a groundnut after roasting. In this machine the nut will be splitted into two halves which will be used in the Chikki manufacturing industry. 200 kg/h 750 kg/h

Oil Expeller Machine | Perfura Technologies This machine is used for squeezing oil from nuts like coconut, groundnut and sesame. A sturdy frame with 7.5 HP electric motor is used for running this machine. 35 kg/h

Groundnut Decorticator Cum Grader | Perfura Technologies This machine is used to separate the nuts from the groundnut shell. Nuts and cord are collected with separate outlets. It is used with grader for grading the good quality nuts from the ungrown ones. 200 kg/h 350 kg/h 500 kg/h 600 kg/h 750 kg/h 900 kg/h

SCREW CONVEYOR | PERFURA TECHNOLOGIES Screw Conveyors are widely used for transferring flour from one place to other or from machine to machine. It can be either manufactured in mild steel or in stainless steel. The length and diameter of the screw conveyor can be suited with customer requirement.

Belt Conveyor | Perfura Technologies Belt Conveyor is used for transfer the grains from one place to the other horizontally. The length and width of the conveyor can be suited as per the requirement. If needed, a hopper can be attached.

Bucket Elevator | Perfura Technologies Bucket Elevator is a machine which can carry grains from ground level to certain height, from there it is then feed into hopper of the next machine. It can be manufactured to various height and capacity based on the customer requirements.